Festo MHJ10-S-2,5-QS-4-MF Solenoid Valve

Name: Festo MHJ10-S-2,5-QS-4-MF Solenoid Valve
Price: 119.06 USD
Availability: BackOrder

Solenoid valve with integrated control electronics for 100l/min flow rate. View other configurations.

$119.06

Part Numbers

MHJ10-S-2,5-QS-4-MF
565515

Highlights...

MHJ10-S-2,5-QS-4-MF
By Festo
FREE Shipping on orders of $1,000 or more
Usually ships in 5 weeks

Features

2/2-way, closed, monostable valve function
Electric type of actuation
10MM construction width
100L2 standard nominal flow rate
0.05MPA operating pressure
0.6MPA operating pressure
0.5BAR operating pressure
6BAR operating pressure
Poppet valve without spring return design
Pneumatic spring type of reset
IP55 degree of protection
RCM trademark approval
To EU EMC Directive cE mark (see declaration of conformity)
In accordance with EU RoHS Directive cE mark (see declaration of conformity)
To UK instructions for EMC cE marking (see declaration of conformity)
To UK RoHS instructions cE marking (see declaration of conformity)
10.5MM grid dimension
Fixed power supply must be able to supply at least 1.7 A without voltage drop note on operation
Do not operate without flow. note on operation
For block mounting with flow, max. ambient temperature 45°C. note on operation
Hard sealing principle
Optional mounting position
None manual override
Direct type of piloting
Non-reversible flow direction
992259 symbol
For operating voltage reverse polarity protection
Spark arresting additional functions
Holding current reduction with energy recovery additional functions
Safety shut-off additional functions
0.38 b value
0.4LSB c value
1000HZ max. switching frequency
0.8MS switching time on 0.4 mPa (4 bar, 58 psi) and 24 v in new condition
0.4MS switching time off 0.4 mPa (4 bar, 58 psi) and 24 v in new condition
0.8MS switching time on 0.05 mPa (0.5 bar, 7.25 psi) and 24 v in new condition
0.5MS switching time off 0.05 mPa (0.5 bar, 7.25 psi) and 24 v in new condition
0.9MS switching time on 0.6 mPa (6 bar, 87 psi) and 24 v in new condition
0.4MS switching time off 0.6 mPa (6 bar, 87 psi) and 24 v in new condition
+15%/-25% tolerance switching time off
+/-15% tolerance switching time on
21.6V operational voltage range dC
26.4V operational voltage range dC
34KOH input resistance
100% duty cycle
24 V DC: low-current phase 2.0 W, high-current phase 7.0 W characteristic coil data
3V trigger signal voltage range dC
30V trigger signal voltage range dC
Linear rise note on input current
0.09-0.44 mA with a trigger signal of 3-15 V note on input current
0.44-15.44 mA with a trigger signal of 15-30 V note on input current
+/- 10 % permissible voltage fluctuations
Compressed air to ISO 8573-1:2010 [7:4:4] operating medium
Lubricated operation not possible note on operating and pilot medium
As a function of switching frequency (see graph) restrictions for environmental and media temperature
2 - Moderate corrosion stress corrosion resistance class cRC
VDMA24364-B2-L lABS (PWIS) conformity
120GC permissible solenoid surface temperature
-5GC media temperature
60GC media temperature
-5GC ambient temperature
60GC ambient temperature
85G product weight
3-wire electrical connection
Cable electrical connection
2.5M cable length
Either: type of mounting
In-line installation type of mounting
With through-hole type of mounting
RoHS-compliant note on materials
HNBR material seals
PA-reinforced material housing
PPS reinforced material housing
PUR material cable sheath
Steel material screws
-20GC to 50GC storage temperature
Pneumatic connection qS-4 , port 1
Pneumatic connection qS-4 , port 2