Festo 4827505 / CPX-E-1CI Counter Module

Features

• 18.9 x 76.6 x 124.3 mm dimensions (W x l x h)
• 18.9MM grid dimension
• With H-rail type of mounting
• 88G product weight
• Vertical mounting position
• Horizontal mounting position
• -5GC ambient temperature
• 50GC ambient temperature
• -5 - 60°C for vertical installation note on ambient temperature
• 95 % relative air humidity
• Non-condensing relative air humidity
• IP20 degree of protection
• 0 - No corrosion stress corrosion resistance class cRC
• Transport application test with severity level 1 to FN 942017-4 and EN 60068-2-6 vibration resistance
• Shock test with severity level 1 to FN 942017-5 and EN 60068-2-27 shock resistance
• VDMA24364 zone III lABS (PWIS) conformity
• To EU EMC Directive cE mark (see declaration of conformity)
• In accordance with EU RoHS Directive cE mark (see declaration of conformity)
• To UK instructions for EMC cE marking (see declaration of conformity)
• To UK RoHS instructions cE marking (see declaration of conformity)
• KC-EMV kC mark
• RCM trademark approval
• C UL us listed (OL) approval
• UL E239998 certificate issuing authority
• RoHS-compliant note on materials
• PA material housing
• Galvanised steel material screws
• Encoder supply error diagnostics via lED
• Errors per module diagnostics via lED
• Encoder error diagnostics via lED
• Encoder normal operation diagnostics via lED
• Encoder supply normal operation diagnostics via lED
• Status per channel diagnostics via lED
• Measuring system error diagnostics via bus
• Short circuit/overload in sensor supply diagnostics via bus
• Parameter errors diagnostics via bus
• Monitoring of wire break diagnostics via bus
• Monitoring of zero pulse diagnostics via bus
• Tracking error monitoring diagnostics via bus
• 12AD max. address volume, inputs
• 2AD max. address volume, outputs
• Debounce time for digital inputs module parameters
• Pulse/zero pulse module parameters
• Integration time for speed measurement module parameters
• Internal revision ID module parameters
• Load value module parameters
• Latching event module parameters
• Latching signal module parameters
• Latching response module parameters
• Upper count limit module parameters
• Signal type/encoder type module parameters
• Signal evaluation module parameters
• Monitoring of cable break module parameters
• Monitoring of zero pulse module parameters
• Tracking error monitoring module parameters
• Lower count limit module parameters
• Signal extension channel parameters
• Encoder supply power supply, function
• Terminal strip power supply, connection type
• Spring-loaded terminal power supply, connection system
• 995844 power supply, connection pattern
• 6 power supply, number of pins/wires
• 24V nominal dC operating voltage, electronics/sensors
• ± 25% permissible voltage fluctuations for electronics/sensors
• 0.2I2 power supply, conductor diameter
• 1.5I2 power supply, conductor diameter
• 0.2 - 2.5 mm² for flexible conductors without wire end sleeves power supply, note on conductor diameter
• Typically 15 mA intrinsic current consumption at nominal operating voltage for electronics/sensors
• 10MS power failure bridging
• 24 V sensor supply against 0 V sensor supply reverse polarity protection
• Digital input electrical connection input, function
• 2x terminal strip electrical connection input, connection type
• Spring-loaded terminal electrical connection input, connector system
• 6 electrical connection input, number of connections/cores
• 995843 electrical connection input, connection pattern
• 0.2I2 electrical connection for input, conductor cross section
• 1.5I2 electrical connection for input, conductor cross section
• 0.2 - 2.5 mm² for flexible conductors without wire end sleeves electrical connection for input, note on conductor cross section
• Counting input electrical connection for input 2, function
• Terminal strip electrical connection for input 2, connection type
• Spring-loaded terminal electrical connection for input 2, connection technology
• 6 electrical connection for input 2, number of pins/wires
• 995848 electrical connection for input 2, connection pattern
• 0.2I2 electrical connection for input 2, conductor cross section
• 1.5I2 electrical connection for input 2, conductor cross section
• 0.2 - 2.5 mm² for flexible conductors without wire end sleeves electrical connection for input 2, note on conductor cross section
• 4 number of inputs
• To IEC 61131-2, type 3 characteristic for inputs
• Signal 0: <= 5 V switching level
• Signal 1: >= 11 V switching level
• PNP (positive switching) switching logic for inputs
• 2-wire sensors to IEC 61131-2 switching logic for inputs
• 3-wire sensors to IEC 61131-2 switching logic for inputs
• 0.02 ms input debounce time
• 0.1 ms input debounce time
• 3 ms input debounce time
• Automatic return behaviour after end of overload of the sensor supply
• 1.8A max. residual current of inputs per module
• No isolation channel - channel
• No isolation channel - internal bus
• Internal electronic fuse per module fuse protection (short circuit)
• -20GC to 70GC storage temperature