Festo CPX-4AE-4AA-H Input Module

Features

• HART protocol
• (incl. interlinking block and connection technology) dimensions (W x l x h)
• 50 x 107 x 70 mm dimensions (W x l x h)
• 50MM grid dimension
• On interlinking block type of mounting
• 77.4G product weight
• -5GC ambient temperature
• 50GC ambient temperature
• 95 % relative air humidity
• Non-condensing relative air humidity
• Dependent on the manifold block degree of protection
• 1 - Low corrosion stress corrosion resistance class cRC
• (when installed) corrosion resistance class cRC
• Transport application test with severity level 2 to FN 942017-4 and EN 60068-2-6 vibration resistance
• Shock test with severity level 2 to FN 942017-5 and EN 60068-2-27 shock resistance
• 500 m max. cable length
• VDMA24364-B2-L lABS (PWIS) conformity
• To EU EMC Directive cE mark (see declaration of conformity)
• RoHS-compliant note on materials
• PA-reinforced material housing
• PC material housing
• 1 Group diagnostics lED display
• 4 channel diagnostics lED display
• 4 Channel status lED display
• Wire break per channel diagnosis
• Limit value violation per channel diagnosis
• Short circuit/overload per channel diagnosis
• Parameterisation error diagnosis
• Overflow/underflow diagnosis
• Limit value violation as per NE43 per channel diagnosis
• DIL switch operator controls
• Data format parameterisation
• Fail-safe per channel parameterisation
• Forcing per channel parameterisation
• Limit monitoring per channel parameterisation
• Idle mode per channel parameterisation
• Measured value smoothing parameterisation
• Signal range per channel parameterisation
• Overflow/underflow monitoring parameterisation
• Monitoring according to NE43 inputs parameterisation
• Wire break monitoring per channel parameterisation
• Number of HART repetitions parameterisation
• Wire break per channel parameterisation
• Limit value violation as per NE43 per channel parameterisation
• Limit value violation per channel parameterisation
• HART variables parameterisation
• Hysteresis for critical limits parameterisation
• Short circuit/overload per channel parameterisation
• Parameterisation error parameterisation
• Overflow/underflow parameterisation
• Behaviour after short circuit/overload parameterisation
• 750OHM max. load
• 18V operational voltage range dC
• 30V operational voltage range dC
• 24V nominal operating voltage dC
• Typ. 170 mA intern power consumption nominal operating voltage
• 10MS power failure bridging
• For all electrical connections reverse polarity protection
• 20.7 V at 20 mA min. available sensor voltage
• 300OHM max. input resistance
• 4 number of selectable analogue inputs/outputs
• 15 bits + prefix data format
• Scalable to 15 bits data format
• 0 - 20 mA analog input
• 4 - 20 mA analog input
• 4 - 20 mA with HART analog input
• 0.05% at 25ºC repetition accuracy
• ±0.1% basic error limit at 25 °C
• ±0.3% operating error limit related to the ambient temperature range
• 0 - 20 mA sensor type
• 4 - 20 mA sensor type
• 4 - 20 mA with HART sensor type
• 28.8V max. open circuit voltage
• No isolation channel - channel
• Yes isolation channel - internal bus
• 22MA max. short circuit current
• Internal electronic fuse per channel fuse protection (short circuit)
• -20GC to 70GC storage temperature