Festo CPX-2ZE2DA Input/output Module

Digital module: Counter module with 2 digital inputs and 2 digital outputs. View other configurations.

$735.58
Part Numbers
  • CPX-2ZE2DA
  • 576046
Highlights...

Features

  • (incl. interlinking block and connection technology) dimensions (W x l x h)
  • 50 x 107 x 50 mm dimensions (W x l x h)
  • 50MM grid dimension
  • 130G product weight
  • IP65 degree of protection
  • IP67 degree of protection
  • 1 - Low corrosion stress corrosion resistance class cRC
  • (when installed) corrosion resistance class cRC
  • 30 m max. cable length
  • VDMA24364-B2-L lABS (PWIS) conformity
  • UL - Recognized (OL) approval
  • RoHS-compliant note on materials
  • Polymer material housing
  • 1 Group diagnostics lED display
  • 10 Channel status lED display
  • 2 Module diagnostics lED display
  • 2 channel diagnostics lED display
  • Operating-mode-dependent diagnostics diagnosis
  • 2 number of outputs
  • Switch-on/off delay parameterisation
  • Frequency output parameterisation
  • Speed measurement parameterisation
  • Pulse output parameterisation
  • Pulse train parameterisation
  • Rotational speed measurement parameterisation
  • Frequency measurement parameterisation
  • Cycle duration measurement parameterisation
  • Motor operating mode parameterisation
  • Determination of position parameterisation
  • Pulse-width modulation parameterisation
  • One-off counting parameterisation
  • Continuous counting parameterisation
  • Periodic counting parameterisation
  • 18V operational voltage range dC
  • 30V operational voltage range dC
  • 24V nominal operating voltage dC
  • Typically 35 mA intern power consumption nominal operating voltage
  • 2 number of inputs
  • To IEC 1131-2, type 02 characteristic for inputs
  • Signal 0: <= 5 V switching level
  • Signal 1: >= 11 V switching level
  • PNP (positive switching) switching logic for inputs
  • 0.1 µs (0.2 µs, 0.4 µs, 0.8 µs, 1 µs, 2 µs, 4 µs, 8 µs, 10 µs, 50 µs, 100 µs, 500 µs, 1 ms, 3 ms, 10 ms, 20 ms parameterisable) input debounce time
  • 2A max. residual current of inputs per module
  • IEC1131-T2 characteristic for outputs
  • NPN (negative switching) switching logic for outputs
  • PNP (positive switching) switching logic for outputs
  • Push-pull driver switching logic for outputs
  • 10A max. residual current outputs per module
  • 5 A adjustable (20 W lamp load) max. power supply per channel
  • No isolation channel - channel
  • Outputs - yes, when using an intermediate air supply isolation channel - internal bus
  • Internal electronic fuse per channel fuse protection (short circuit)
  • -5GC ambient temperature to 50GC ambient temperature
  • -20GC to 70GC storage temperature
View other configurations.